CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go

CNC vertical Milling Machine for Steel,axis drive to choose,no pinole Pinole massive Konebearing,2,2kw,VFD,220V,SK30,Y=175mm,Control to be choosen preconfigured ready to go

Short description:

This in Austria manufactured machine is ready for all you challenges
up to 5th axis is possible
Choose how the axis are driven (all european products)
Spindle Sync/feedback for CNC Gearcutting or spindle orientation is possible

This machine is a vertical precision milling machine with polished profiled rail guides (in all 3 axes) for maximum positioning accuracy and precision.
engine speed is electronic controlled. Verry stable and quiet. especially gentle and praxisoriented use.

Basic configuration  : 

  • electronic controlled spindle revolution , clockwise and opposite direction
  • Spindel toolholder ISO 30 taper,high concentricity because of tapered rollerbearings (0,01mm measured at quill!), utilize a 3-stage SPZ-transmission,
  • No Quill but therefore a massive Koneballbearing
  •  Vertical stand is extreme robust (160mm wide) with high precision, hardened and polished profiled rail guides 
  •  Rail guides are guarded using sheetmetal lamela - therefore no burn through of hot chips
  •  Millhead can be swiveled till 180° 
  •  Short-taper ISO30 to mount tools/holder in the spindle - therefore extreme reliable mount of tools(no obviousness in our range of mills!!)
  •  Steeltable, standardtub and 6 sheetmetal splashguards  (follhousing is availiable as an option)
  •  Motorsafety features incl. kill-switch, overcurrent, overvoltage, overtemperature, adjustable acceleration-time and brake retardion using an High efficient frequency inverter  - Engine: 400V /2,3kw speed starting from  10 to 4000 rpm, not encapsulated i.e. well cooled., driven by an  3-stage SPZ-transmission angetrieben - therefore at uat lower and higher revolutions maximum motor torque
  • 220V Connection (16A) Highperformance VFD ,left , right speed and safety features  
  • Crossingtable 200 x 750mm precise, massiv, surface polished, travel 187 x 427mm, 3 T-Slots (14mm wide), high precision, hardened and polished Liniarrails
  • Axis Speed Standard 22mm/sec up to 66mm/sec Fastmoves tecnically at Closed Loop 86mm/sec possible but is ramp dependend.
  • Drawbar to mount tools or holder 
  • Handbook 
  • axis are driven standardwise by powerful Nanotec German Quality motors (you can choose different aswell)
  • axis are driven by precise ball screws 
  • Closed loop configuration is possible 
  • CNC control can be choosen Parallel board or FPGA cards
  • Motor amplifier is modular and verry powerful  (mad in finnland,or Germany)   
  • up to 4th Axis control possible (FPGA Cards can do 5th Axis as well)
  • MINI ITX Computer preconfigured ready to use (you can select screen and keyboard if needed)
  • Endstops, cable etc. ,

Over all an  complete package to be noticed :

  • we only use high quality components mainly from europe (Linear rails, drive,control, etc)
  • precise and big crosstable
  • convenient positioning of handwheels (for hight adjustment)
  • Quill has 70mm diameter and 80mm travel, 
  •  Steel -table tub and 6 splashguard are already in basic package and full cover

  • Available now!
  • Item no.: TFC11B
  • Shipping weight: 360,00 kg
  • Product weight: 320,00 kg
  • Our price: 6.962,00 €
  • including 20% VAT., plus shipping (Spedition)
Loading ...

  • Axis drive
  • Spindelsync (CNC Threading option)

Description

  • Voltage 220V (16A fuse sufficient) , variable frequency drive
  • No Quill but therefore a massive Koneballbearing
  • Tool mount ISO30 ,mount via draw bar  
  • Massive milling stand and sheetmetal cover
  • Milling head can tilt up to180°
  • Cross table  220x750mm travel 187x428mm
  • Tecnical axis speed standard 42mm/sec and Closed Loop 86mm/sec possible
  • All axis have linear rails and ballscrews
  • axis are driven by powerful Nanotec steppers in closed loop configuration
  • axis are driven by precise ball screw drives 
  • Control via PCI card (17 GPIO)
  • Computer control comes with software pre installed.
  • Machine height without steeltable 1350mm
  • Depth and with without follhousing 520x900mm
  • Depth and with with follhousing 950x1400 mm
  • Axis Speed Standard 22mm/sec up to 66mm/sec Fastmoves tecnically at Closed Loop 86mm/sec possible but is ramp dependend.

Recommend item

Contact information
This product consists of
Cooling
Housing